Moteur de recherche d’entreprises européennes
UK funding (105 716 £) : Production et caractérisation de revêtements nanocomposites TiN/Ag résistants à l’usure et antimicrobiens Ukri28/01/2008 UK Research and Innovation, Royaume Uni
Vue d’ensemble
Texte
Production et caractérisation de revêtements nanocomposites TiN/Ag résistants à l’usure et antimicrobiens
| Abstract | This proposal seeks funding for a Visiting Fellowship to investigate novel nano-composite TiN/Ag surface coatings with potential applications in areas as diverse as cutting tools and biomaterials.Titanium nitride (TiN) is a workhorse hard, wear resistant coating material, which is widely applied to cutting and forming tools and other components operating in an abrasive wear environment. TiN is not, though, known as a low friction material and does not generally offer protection to the mating face during use. Indeed, unlubricated tribological tests on films produced by these techniques tend to result in coefficients of friction in the range 0.3-0.9, depending on test geometry, mating face material, etc. However, our studies have shown that the introduction of pulsed processing at the target and more recently at the substrate can lead to a remarkable enhancement of the tribological characteristics of TiN coatings with, for example, coefficients of friction of less than 0.1 being recorded in unlubricated wear tests.It is anticipated that the inclusion of silver in these coatings can further enhance their characteristics. When deposited together by co-sputtering from two targets, the coating forms a structure that consists of a matrix of TiN surrounding nano-particles of silver. In wear situations, the silver particles can act as a solid lubricant, thus lowering the coefficient of friction and reducing damage to the mating face. The 'self-lubricating' nature of these coatings, combined with their high hardness and scratch resistance makes them attractive for tribological applications. Moreover, titanium compounds are also biocompatible. Combining these properties with the inherent anti-microbial nature of silver opens up a number of novel applications for TiN/Ag nano-composite films in, for example, the bio-medical or food processing industries.Whilst Ag-containing nano-composite coatings have been the subject of a number of studies, there is very little published work on the TiN/Ag system, with only limited consideration of the properties of these films. The Visiting Fellow will, therefore, study the production of nano-composite TiN/Ag coatings, characterise their surface properties, and investigate novel applications of these coatings. Collaborators at the Jost Institute of Tribotechnology at UCLan will assist the Visiting Fellow in the assessment of the tribological properties of the coatings. And from a microbiological perspective, in-post staff at MMU will assist by assessing the coatings in terms of their effect on microbial retention and viability on surfaces using a range of microorganisms of importance in medical device infection, and contamination of food processing surfaces. |
| Category | Research Grant |
| Reference | EP/F014325/1 |
| Status | Closed |
| Funded period start | 28/01/2008 |
| Funded period end | 27/01/2009 |
| Funded value | £105 716,00 |
| Source | https://gtr.ukri.org/projects?ref=EP%2FF014325%2F1 |
Participating Organisations
| Manchester Metropolitan University |
Cette annonce se réfère à une date antérieure et ne reflète pas nécessairement l’état actuel. L’état actuel est présenté à la page suivante : Manchester Metropolitan University Firm (Financial Conduct Authority), Manchester, Royaume Uni.
