Moteur de recherche d’entreprises européennes
Financement de l’UE (12,4 M €) : Fabrication additive à l’aide d’une ligne pilote métallique Hor01/10/2018 Programme de recherche et d'innovation de l'UE « Horizon »
Vue d’ensemble
Texte
Fabrication additive à l’aide d’une ligne pilote métallique
Metal additive manufacturing (AM) allows, by enabling use of advanced design, production of high added value components, at levels that cannot be reached with conventional manufacturing technique. Still, the AM-based manufacturing sequence implies large amounts of critical steps – design for AM, AM fabrication, post processing, etc. – compared to conventional production sequences. Presently, the key competencies related to these steps are either not fully implemented at industrial level (process quality monitoring) or dispersed geographically with poor connection between different steps. Relying on two major AM technologies (LPBF: Laser Powder Bed Fusion and EBM Electron Beam Melting), MANUELA aims at deploying an open-access pilot line facility, covering the whole production sequence, to show full potential of metal AM for industrial AM production. At first, careful instrumentation and adaptation of LPBF & EBM machines will allow increased process reliability and speed. Secondly, the pilot line – including the adapted processes – will be deployed. The hardware layer will integrate novel process quality control monitoring and automated post-AM handling and processing. The line will be fed by design/optimization and AM process simulation workshops. Those workshops will collect continuous feedback from the physical parts of the pilot lines, to increase process reliability and robustness. MANUELA relies on a consortium composed of industrial end user’s, suppliers, (material/powder, AM hardware, quality monitoring system, software, automation and post-AM treatment) as well as top research institutes in powder-bed metal-AM, covering full range of AM technology chain for pilot line deployment. The deployed pilot line will be validated for use cases, covering wide span of applications including automotive, aerospace, energy and medical. To insure sustainability of the deployed line and its open access at project end, a dedicated exploitation plan will be established.
| ABB AB | 92 960 € |
| Amires s.r.o. | 31 750 € |
| Amires The Business Innovation Management Institute ZU | 160 875 € |
| Biomedical Engineering s.r.o. | 197 500 € |
| Cardiff University | 476 213 € |
| Chalmers Tekniska Hogskola AB | 2 476 125 € |
| Csem Centre Suisse D'Electronique ET DE Microtechnique SA - Recherche ET Developpement | 1 743 598 € |
| Eidgenossisches Institut FUR Metrologie Metas | 248 775 € |
| Electro Optical Systems Finland Oy | 731 125 € |
| Enel Green Power S.p.A. | 79 581 € |
| Enel Produzione S.p.A. | 24 269 € |
| Friedrich-Alexander-Universitaet Erlangen-Nuernberg | 948 635 € |
| Hitachi Energy Sweden AB | 7 856,88 € |
| Hoganas AB | 114 125 € |
| MSC Software GmbH | 593 340 € |
| MSC Software Sàrl | 0,00 € |
| MSC Software Srl | 0,00 € |
| O.E.B. Srl | 153 134 € |
| Osai Automation System S.p.A. Societa' Benefit | 221 125 € |
| Politecnico Di Torino | 993 906 € |
| Qioptiq Ltd. | 5 083,33 € |
| Rise IVF AB | 880 280 € |
| Rise Research Institutes OF Sweden AB | 604 860 € |
| Ruag Slip Rings SA | 226 125 € |
| Siemens Energy AB | 321 875 € |
| Stiftelsen Chalmers Industriteknik | 1 115 000 € |
https://cordis.europa.eu/project/id/820774
Cette annonce se réfère à une date antérieure et ne reflète pas nécessairement l’état actuel.
